Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode show Commands (A-C)
show asngw-service session counters ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4159
show asngw-service session counters
Displays statistics for specific Access Service Network Gateway (ASN-GW) sessions.
Product
ASN-GW
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show asngw-service session counters [ [ function-type { auth-relay | context-transfer |
data-path | handoff | im-operation | ms-state-change | paging | qos } ] | [ anchor-only |
callid call_id | ip-address ipv4_address | msid msid_number | non-anchor-only | peer-
address ipv4_address | username user_name ] [ r4-only | r6-only | verbose ] ] [ | { grep
grep_options | more } ]
data-path | handoff | im-operation | ms-state-change | paging | qos } ] | [ anchor-only |
callid call_id | ip-address ipv4_address | msid msid_number | non-anchor-only | peer-
address ipv4_address | username user_name ] [ r4-only | r6-only | verbose ] ] [ | { grep
grep_options | more } ]
anchor-only
Displays all available information for all active anchor sessions in an ASN-GW service.
callid call_id
Displays available information for the call identification number specified as an 8-digit hexadecimal number.
function-type { auth-relay | context-transfer | data-path | handoff | im-
operation | ms-state-change | paging | qos }
operation | ms-state-change | paging | qos }
Displays the counters for specific type of functions in an ASN-GW session.
auth-relay
: Displays information about authentication relay messages.
context-transfer
: Displays information about context-transfer messages.
data-path
: Displays information about data-path registration messages.
handoff
: Displays information about hand-off messages.
im-operations
: Displays information about idle mode state operation messages.
ms-state-change
: Displays information about MS state change messages.
paging
: Displays information about paging messages.
qos
: Displays information about RR messages.
ip-address ipv4_address
Specifies the IP address of the subscriber in IPv4 dotted-decimal notation.
msid msid_number
Displays available information for the specific mobile station identification (MSID) number.