Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ACS Charging Action Configuration Mode Commands
▀ video bitrate
▄ Cisco ASR 5x00 Command Line Interface Reference
418
video bitrate
This command allows you to specify the default target bit rate to use for the video pacing feature on the Mobile Video
Gateway. This value is also used as the suggested maximum bit rate for the video optimization policy control feature.
Gateway. This value is also used as the suggested maximum bit rate for the video optimization policy control feature.
Product
MVG
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-charging-action)#
Syntax
[ default | no ] video bitrate bit_rate [ -noconfirm ]
default
Sets video bitrate to its default value.
no
Deletes the video bit rate if previously configured.
video bitrate bit_rate
Specifies the bit rate, in bits per second, at which the TCP video flow should be paced during video pacing.
This value is also used as the suggested maximum bit rate for the video optimization policy control feature.
For video pacing, this default bit rate is used on each video flow until the rate determination function
calculates the optimal bit rate for pacing.
This value is also used as the suggested maximum bit rate for the video optimization policy control feature.
For video pacing, this default bit rate is used on each video flow until the rate determination function
calculates the optimal bit rate for pacing.
bit_rate
must be an integer from 0 to 256000000.
Default: 0
-noconfirm
Specifies that the command must execute without prompting for confirmation.
Usage
Use this command to specify the default bit rate to use for the video pacing feature, and the suggested
maximum bit rate for the video optimization policy control feature.
maximum bit rate for the video optimization policy control feature.
Example
The following command sets the bit rate for the video flow at
300000
(300kbps):
video bitrate 300000