Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode show Commands (H-L)
show ip as-path-access-list ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4419
show ip as-path-access-list
Displays the contents of a Border Gateway Protocol (BGP) router Autonomous System (AS) path access list in the
current context.
current context.
Product
HA
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ip as-path-access-list list_name [ | { grep grep_options | more } ]
list_name
Specifies the name of an existing AS path access list configured in the current context as an alphanumeric
string of 1 through 79 characters.
string of 1 through 79 characters.
| { grep
grep_options
|
more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to display the configured entries for the specified BGP router AS path access list in the
current context.
current context.
Example
The following command displays the contents of an AS path access list named
ASlist1
:
show ip as-path-access-list ASlist1