Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode show Commands (M-P)
▀ show pdg-service statistics
▄ Cisco ASR 5x00 Command Line Interface Reference
4572
show pdg-service statistics
Displays statistics for the Packet Data Gateway/Tunnel Termination Gateway (PDG/TTG) since the last restart or clear
command. The output includes the number of each type of Extensible Authentication Protocol (EAP) messages.
command. The output includes the number of each type of Extensible Authentication Protocol (EAP) messages.
Product
PDG/TTG
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show pdg-service statistics [ name service_name | peer-address ipv4_address ]
name
service_name
Displays statistics for an existing PDG service specified an alphanumeric string of 1 through 63 characters.
peer-address ipv4_address
Displays statistics for a specific subscriber with the WLAN IP address specified in IPv4 dotted-decimal
notation.
notation.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section in the
Command Line Interface Overview chapter.
Usage
Use this command to display PDG service statistics.
Example
The following command displays statistics for all active PDG services:
show pdg-service statistics