Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode show Commands (Q-S)
▀ show subscribers
▄ Cisco ASR 5x00 Command Line Interface Reference
4684
show subscribers
Displays information for subscriber sessions that are defined by specified keywords. Command keywords are base
commands that display distinctive types of data. Filter keywords are a superset of command keywords that modify or
filter the output of the base commands.
commands that display distinctive types of data. Filter keywords are a superset of command keywords that modify or
filter the output of the base commands.
Important:
Not all filter keywords are available for all command keywords. CLI Help displays available filter
keywords based on: the platform type (ASR 5000 or ASR 5500), the products that are licensed to run on the platform,
and the preceding command keyword and subsequent filter keywords.
and the preceding command keyword and subsequent filter keywords.
Product
All
Privilege
Security Administrator, Administrator, Inspector, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show subscribers [ command_keyword ] [ filter_keywords ] [ | { grep grep_options | more }
]
]
command_keyword
The following keywords are base commands that each have a distinct display output. Only one command
keyword can be entered on the command line.
keyword can be entered on the command line.
aaa-configuration
Displays Authentication Authorization and Accounting (AAA) configuration information for subscriber
sessions defined by the specified filter keywords. The following filter keywords are valid with this command:
sessions defined by the specified filter keywords. The following filter keywords are valid with this command:
active, active-charging -service, all, apn,
asn-peer-address, asngw-
service, asnpc-service,
bandwidth-policy, bearer-establishment, bng-
service, callid, card-num, cbb-policy, ccoa-only, configured-idle-
timeout, connected-time, dhcp-server, dormant, ebi, enodeb-address,
timeout, connected-time, dhcp-server, dormant, ebi, enodeb-address,
epdg-
address,
fa, fa-service, firewall, fw-and-nat, ggsn-service,
gprs-
service,
gsm-traffic-class, gtp-version, gtpu-bind-address, gtpu-
service, ha, ha-ipsec-only, ha-service, hnbgw-only,
hsgw-service,
idle-
time, ims-auth-service, imsi, ip-address, ip-alloc-method, ip-pool, ipv6-
address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address,
lac, lac-service,
address, ipv6-prefix, l3-tunnel-local-address, l3-tunnel-remote-address,
lac, lac-service,
lma-service,
lns, lns-service, long-duration-time-
left,
mag-service,
mip-udp-tunnel-only, mipv6ha-service,
mme-address,
mme-service,
msid, nemo-only network-requested, network-type, pcf,
pdg-
service, pdif-service,
pdsn-service,
pgw-address,
plmn-type, profile-
id, profile-name, qci, rx-data, s1u-state, s5-proto, session-time-left,