Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Firewall-and-NAT Policy Configuration Mode Commands
nat binding-record ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4859
nat binding-record
This command configures the generation of NAT Binding Records.
Product
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Firewall-and-NAT Policy Configuration
active-charging service service_name > fw-and-nat policy policy_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-fw-and-nat-policy)#
Syntax
nat binding-record edr-format edr_format [ port-chunk-allocation ] [ port-chunk-release ]
{ default | no } nat binding-record
default
Configures the default setting.
Default:
Default:
port-chunk-release
no
Disables generating NAT Binding Records.
edr-format edr_format
Specifies the Event Data Record (EDR) format name.
edr_format
must be an alphanumeric string of 1 through 63 characters.
port-chunk-allocation
Specifies generating NAT Binding Records when a port-chunk is allocated.
port-chunk-release
Specifies generating NAT Binding Record when a port-chunk is released.
Usage
Use this command to configure the generation of NAT Binding Records.
Example
The following command configures an EDR format named
test123
and specifies generating NAT Binding
Records when a port chunk is allocated:
nat binding-record edr-format test123 port-chunk-allocation