Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Firewall-and-NAT Access Ruledef Configuration Mode Commands
udp any-match ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4903
udp any-match
This command configures an access ruledef to match any UDP traffic for the user.
Product
PSF
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Firewall-and-NAT Access Ruledef Configuration
active-charging service service_name > access-ruledef access_ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-fw-ruledef)#
Syntax
[ no ] udp any-match operator condition
no
Removes previously configured UDP any-match ruledef.
operator
Specifies how to logically match the analyzed state.
operator
must be one of the following:
!=
: does not equal
=
: equals
condition
Specifies the condition to be matched for the user traffic.
condition
must be one of the following:
FALSE
: Specified condition is FALSE.
TRUE
: Specified condition is TRUE.
Usage
Use this command to specify an access ruledef to match any UDP traffic of the user.
Example
The following command creates an access ruledef to match any UDP traffic of the user:
udp any-match = TRUE