Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (A-K)
call-control-profile ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5029
call-control-profile
Creates an instance of a call-control profile.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] call-control-profile cc_profile_name
no
Deletes the Call-Control Profile instance from the configuration.
cc_profile_name
Specifies the name of the call-control profile. Enter an alphanumeric string of 1 through 64 characters.
Usage
Use this command to create an instance of a call-control profile and to enter the call-control profile
configuration mode. A call-control profile is a template which groups a set of call-handling instructions that
may be applicable to one or more incoming calls. See the Call-Control Profile Configuration Mode
Commands chapter for information regarding the definition of the rules contained within the profile and the
use of the profile.
configuration mode. A call-control profile is a template which groups a set of call-handling instructions that
may be applicable to one or more incoming calls. See the Call-Control Profile Configuration Mode
Commands chapter for information regarding the definition of the rules contained within the profile and the
use of the profile.
Important:
A call-control profile is a key element of the Operator Policy feature and is only valid when
associated with at least one operator policy.
To see what call-control profiles have already been created, return to the Exec mode and enter the
show
call-control-profile all
command.
Example
The following command creates a configuration instance of an call-control profile:
call-control-profile ccprof1