Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (A-K)
hd raid ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5135
hd raid
Performs RAID management operations on the platform hard disk drives.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
For the ASR 5000:
hd raid { check | create | insert | overwrite | remove select } local1 |
remote1 } } [ -force ] [ -noconfirm ]
remote1 } } [ -force ] [ -noconfirm ]
For the ASR 5500:
hd raid { check | create | insert | overwrite | remove select } hd_num [
-force ] [ -noconfirm ]
-force ] [ -noconfirm ]
check
Starts a background check on RAID disks unless the RAID is running in degraded mode.
create local1
|
remote1
On the ASR 5000, creates a new RAID that could run in degraded mode on the specified drive:
local1
specifies the RAID is to be established on the primary SMC.
remote1
specifies the RAID is to be
established on the backup SMC.
create hd_num
On the ASR 5500, creates a new RAID that could run in degraded mode on the hard drive array of a specific
FSC.
FSC.
hd_num
specifies the RAID is to be established on the FSC in slot numbers 13 through 18 (hd13, hd14, ...
hd18).
insert local1
|
remote1
On the ASR 5000, inserts the specified disk to the running RAID causing it to recover from degraded mode.
local1:
specifies the primary SMC is to be inserted into the RAID.
remote1:
specifies the backup SMC is
to be inserted into the RAID.