Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (L-S)
logging monitor ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5173
logging monitor
Enables or disables the monitoring of a specified user.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] logging monitor { ipaddr ip_address | ipv6addr ipv6_address | msid ms_id |
username user_name }
username user_name }
no
Disables the monitoring of the user specified by the options given.
ipaddr
ip_address
Specifies the IP address of the user for which the monitoring filter is to be set.
ip_address
must entered
using IPv4 dotted-decimal notation.
ipv6addr
ipv6_address
Specifies the IPv6 address of the user for which the monitoring filter is to be set.
ipv6_address
must be
followed by IPv6 address in a xx:yy::zz format .
msid
ms_id
msid
ms_id
: specifies the mobile subscriber ID for which the monitoring filter is to be set.
ms_id
must be
from 7 to 16 digits.
This keyword/option can be used to specify the Mobile Subscriber ISDN (MSISDN) for GGSN calls which
enables logging based on MSISDN.
This keyword/option can be used to specify the Mobile Subscriber ISDN (MSISDN) for GGSN calls which
enables logging based on MSISDN.
username
user_name
username
user_name
: specifies a user for which the monitoring filter is to be set.
user_name
must refer to
a previously configured user.
Usage
Monitor subscribers which have complaints of service availability or to monitor a test user for system
verification.
verification.