Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (L-S)
port channelized ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5197
port channelized
Identifies a physical port on a Channelized Line Card (CLC) that supports Frame Relay signaling and creates a Frame
Relay interface. This command enters the configuration mode for the commands that configure the Frame Relay
interface and the channelized port interface. For additional information, see the Channelized Port Configuration Mode
Commands chapter.
Relay interface. This command enters the configuration mode for the commands that configure the Frame Relay
interface and the channelized port interface. For additional information, see the Channelized Port Configuration Mode
Commands chapter.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
port channelized slot/port
channelized
Selects the channelized frame relay interface for the selected line card and port.
slot/port
To determine valid slots and port numbers, use the Exec mode’s command
show port table
to find the
channelized line card
.
slot:
Identifies the chassis slot holding the Channelized Line Card that sources Frame Relay ports. The slot
ID number can be an integer from 17 through 48.
port:
Identifies the physical port that is to be configured to support Frame Relay signaling. The ID number
can only be 1.
Usage
Change the current configuration mode to Channelized Port configuration mode.
Example
The following enters the Channelized port configuration mode for port 1 on the card in slot 20:
port channelized 20/1