Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (L-S)
▀ profile-id-qci-mapping
▄ Cisco ASR 5x00 Command Line Interface Reference
5202
profile-id-qci-mapping
Creates a Qos Class-Identifier-Radio Access Network (QCI-RAN) ID mapping table or specifies an existing table and
enters the QCI Mapping Configuration mode for the system.
enters the QCI Mapping Configuration mode for the system.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] profile-id-qci-mapping name [ -noconfrm ]
no
Removes the specified mapping table from the system
name
Creates a new or enters an existing mapping table configuration.
name
must be an alphanumeric string of 1
through 63 alphanumeric.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Enters the QCI-RAN ID mapping configuration mode for an existing table or for a newly defined table. This
command is also used to remove an existing table.
Entering this command results in the following prompt:
command is also used to remove an existing table.
Entering this command results in the following prompt:
[context_name]hostname(config-hsgw-association-table)#
QCI Mapping Configuration Mode commands are defined in the QCI Mapping Configuration Mode
Commands chapter.
Use this command when configuring the HSGW eHRPD component.
Commands chapter.
Use this command when configuring the HSGW eHRPD component.
Important:
This command creates a mapping table available to any HSGW context configured on the system.
Example
The following command enters the existing QCI mapping configuration mode (or creates it if it doesn’t
already exist) for a mapping table named
already exist) for a mapping table named
qci_table1
: