Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ACS Configuration Mode Commands
policy-control burst-size ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
525
policy-control burst-size
This command allows you to configure the burst size for bandwidth limiting per dynamic-rule or per bearer.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration
active-charging service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs)#
Syntax
policy-control burst-size { auto-readjust [ duration duration ] | bytes bytes }
{ default | no } policy-control burst-size
default | no
Configures this command with its default setting.
Default: 65535 bytes
Default: 65535 bytes
duration duration
Configures the burst size equal to <seconds> of traffic.
duration
must be an integer from 1 through 20.
Default: In 12.1 and earlier releases, 10 seconds. In 12.2 and later releases, 5 seconds.
bytes bytes
Specifies the burst size, in bytes.
bytes
must be an integer from 1 through 4000000000.
Usage
Use this command to configure the burst size for bandwidth limiting per dynamic-rule or per bearer.
Example
The following command configures the burst size for bandwidth limiting per dynamic-rule or per bearer
equal to 10 seconds of traffic:
equal to 10 seconds of traffic:
policy-control burst-size auto-readjust