Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (T-threshold phspc)
threshold aaa-acct-archive-size ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5291
threshold aaa-acct-archive-size
Configures accounting message archive size, alarm or alert thresholds.
Product
PDSN
GGSN
HA
ASN-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold aaa-acct-archive-size high_thresh [ clear low_thresh ]
default threshold aaa-acct-archive-size
high_thresh
Default: 1
Specifies the high threshold number of archived accounting messages that must be met or exceeded within
the polling interval to generate an alert or alarm.
Specifies the high threshold number of archived accounting messages that must be met or exceeded within
the polling interval to generate an alert or alarm.
high_thresh
is an integer from 0 through 1044000.
clear low_thresh
Default: 1
Specifies the low threshold number of archived accounting messages that maintains a previously generated
alarm condition. If the number of failures falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
Specifies the low threshold number of archived accounting messages that maintains a previously generated
alarm condition. If the number of failures falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
low_thresh
is an integer from 0 through 1044000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
In the event that the system cannot communicate with configured AAA accounting servers (RADIUS or
CGFs), either due to the server being busy or loss of network connectivity, the system buffers, or archives,
the accounting messages.
Accounting message archive size thresholds generate alerts or alarms based on the number of AAA
accounting messages buffered in the archive during the specified polling interval. Accounting requests are
counted for all AAA accounting servers that the system is configured to communicate with.
CGFs), either due to the server being busy or loss of network connectivity, the system buffers, or archives,
the accounting messages.
Accounting message archive size thresholds generate alerts or alarms based on the number of AAA
accounting messages buffered in the archive during the specified polling interval. Accounting requests are
counted for all AAA accounting servers that the system is configured to communicate with.