Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (T-threshold phspc)
threshold pdif-current-active-sessions ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5409
threshold pdif-current-active-sessions
Configures alarm or alert thresholds for monitoring the total number of currently active Packet Data Interworking
Function (PDIF) sessions.
Function (PDIF) sessions.
Product
PDIF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold pdif-current-active sessions high_thresh [ clear low_thresh ]
high_thresh
Configures the total number of active PDIF sessions to be monitored on a chassis.
high_thresh
is any
integer from 0 through 1000000.
There is no default, but 0 means that there is no threshold monitoring.
There is no default, but 0 means that there is no threshold monitoring.
clear low_thresh
Clears the specified number of sessions being monitored using the
high_thresh
variable defined above.
low_thresh
is any integer from 0 through 1000000.
Usage
Thresholds are provided for monitoring the overall PDIF usage on a chassis. This command is used to
monitor the total number of active PDIF sessions for an entire chassis.
monitor the total number of active PDIF sessions for an entire chassis.
Example
The following command configures a monitoring threshold of
300000
and a clearing threshold of
100000
active PDIF sessions on a chassis:
threshold pdif-current-active-sessions 300000 clear 100000