Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Global Configuration Mode Commands (threshold poll commands A - N)
threshold poll contfilt-block interval ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5495
threshold poll contfilt-block interval
Configures the polling interval Content Filtering Block threshold.
Product
CF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold poll contfilt-block interval duration
default threshold poll contfilt-block interval
default
Uses the default threshold polling interval.
Default: 300 seconds
Default: 300 seconds
interval duration
Specifies the polling interval (in seconds) for the Content Filtering Block threshold.
duration
must be an integer from 60 through 60000.
Usage
This command configures the polling interval Content Filtering Block threshold.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a
polling interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
threshold monitoring
and other threshold commands for additional information on the
system’s support for thresholds in this chapter.
Important:
To enable an SNMP trap for monitoring this threshold use the
snmp trap enable
ThreshContFiltBlock
command in this mode.
Example
The following command configures the polling interval to
600
seconds for the content filtering blocking
threshold:
threshold poll contfilt-block interval 600