Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
GPRS Service Configuration Mode Commands
gmm ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5725
gmm
gmm
actually provides a set of commands used to define the GPRS mobility management parameters for the SGSN
service.
Important:
The
gmm
commands can be repeated as needed to set each timer.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
gmm { accept-procedure [ new-tlli | old-tlli ] | attach ptmsi-signature-mismatch send-
reject failure-code cause_code | ciph-gmm-msg-from-unknown-ms { detach | ignore } |
mobile-reachable-timeout mins implicit-detach-timeout secs | negotiate-t3314-timeout secs
| paging-failure-action downlink-data-lockout-timer seconds [ repeat number_repeats ] |
purge-timeout mins | T3302-timeout mins | T3312-timeout mins | T3313-timeout secs | t3346
min minimum max maximum | T3350-timeout secs | T3360-timeout secs | T3370-timeout secs |
trau-timeout secs }
reject failure-code cause_code | ciph-gmm-msg-from-unknown-ms { detach | ignore } |
mobile-reachable-timeout mins implicit-detach-timeout secs | negotiate-t3314-timeout secs
| paging-failure-action downlink-data-lockout-timer seconds [ repeat number_repeats ] |
purge-timeout mins | T3302-timeout mins | T3312-timeout mins | T3313-timeout secs | t3346
min minimum max maximum | T3350-timeout secs | T3360-timeout secs | T3370-timeout secs |
trau-timeout secs }
default gmm { attach ptmsi-signature-mismatch | ciph-gmm-msg-from-unknown-ms | mobile-
reachable-timeout | implicit-detach-timeout secs | negotiate-t3314-timeout | purge-
timeout | T3302-timeout | T3312-timeout | T3313-timeout | T3350-timeout | T3360-timeout |
T3370-timeout | trau-timeout }
reachable-timeout | implicit-detach-timeout secs | negotiate-t3314-timeout | purge-
timeout | T3302-timeout | T3312-timeout | T3313-timeout | T3350-timeout | T3360-timeout |
T3370-timeout | trau-timeout }
no gmm | negotiate-t3314-timeout
default
Disables the specified function or resets the specified timer to system defaults.
no
Removes the specified GMM definition from the configuration.
accept-procedure [ new-tlli | old-tlli ]
Default: new-tlli
This keyword enables the use of either a new TLLI (temporary logical link identifier) or an old TLLI for
attach-accept or RAU-accept messages sent by the SGSN to the MS during related procedures.
This keyword enables the use of either a new TLLI (temporary logical link identifier) or an old TLLI for
attach-accept or RAU-accept messages sent by the SGSN to the MS during related procedures.