Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Gs Service Configuration Mode Commands
▀ pool-area
▄ Cisco ASR 5x00 Command Line Interface Reference
5772
pool-area
This command creates a pool area configuration instance. This command also enters the Pool Area configuration mode
to define the set of VLRs to use for a pool area for a set of subscriber location area code (LAC) values in the Gs service.
to define the set of VLRs to use for a pool area for a set of subscriber location area code (LAC) values in the Gs service.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Gs Service Configuration
configure > context context_name > gs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gs-service)#
Syntax
pool-area pool_name [ -noconfirm ]
no pool-area non_pool_name
no
Removes the configured pool area from this Gs service.
pool_name
Specifies the name of the pool area to configure with this command for VLR pooling and association of a
LAC.
LAC.
pool_name:
Must be an alpha and/or numeric string of 1 to 63 characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Use this command to create/enter the pool area configuration mode. This mode is used configure the set of
VLRs to be used for a set of subscriber LAC.
This command can be used multiple times, subject to a limit of 128 LAC values (the total number of
VLRs to be used for a set of subscriber LAC.
This command can be used multiple times, subject to a limit of 128 LAC values (the total number of
non-
pool-area
and
pool-area
configurations) per Gs service.
Example
The following command configures a pool area named
starpool1
in a Gs service without any confirmation
prompt.
pool-area starpool1 -noconfirm