Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
GTPP Server Group Configuration Mode Commands
▀ gtpp storage-server timeout
▄ Cisco ASR 5x00 Command Line Interface Reference
5854
gtpp storage-server timeout
Configures the amount of time that must pass with no response before the system re-attempts to communicate with the
GTPP back-up storage server.
GTPP back-up storage server.
Product
GGSN
P-GW
SAEGW
SGSN
S-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpp-group)#
Syntax
[ default ] gtpp storage-server timeout duration
default
Restores the timeout duration to the default of 30 seconds.
duration
Specifies the maximum amount of time (in seconds) that the system waits for a response from the GTPP
back-up storage server before assuming the packet is lost.
back-up storage server before assuming the packet is lost.
duration
is an integer from 30 through 120. Default: 30
Usage
This command works in conjunction with the gtpp storage-server max-retries command to establish a limit
on the number of times that communication with a GTPP back-up storage server is attempted before a failure
is logged.
This parameter specifies the time between retries.
on the number of times that communication with a GTPP back-up storage server is attempted before a failure
is logged.
This parameter specifies the time between retries.
Example
The following command configures a retry timeout of
60
seconds:
gtpp storage-server timeout 60