Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
HA Service Configuration Mode Commands
idle-timeout-mode ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5909
idle-timeout-mode
Configures the sessions idle-timer reset behavior.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HA Service Configuration
configure > context context_name > ha-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ha-service)#
Syntax
idle-timeout-mode { aggressive | handoff | normal } [ upstream-only ]
default idle-timeout-mode
default
Resets the idle timeout mode to the default settings.
aggressive
Resets the session idle timer only when MIP user data is detected. This is the default behavior.
handoff
Resets the session idle timer when MIP user data is detected and an inter-Access Gateway/FA handoff
occurs.
occurs.
normal
Resets the session idle timer when MIP user data is detected and any MIP control signaling occurs.
upstream-only
Only upstream user data (data from the mobile node) resets the idle timer for the session. This is disabled by
default.
default.
Usage
Use this command to set how the current HA service resets the idle timer for a session.
Example
To reset the idle timer whenever user data is detected or whenever an inter-Access Gateway/FA occurs, use
the following command:
the following command:
idle-timeout-mode
handoff