Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
HA Service Configuration Mode Commands
▀ ip pool
▄ Cisco ASR 5x00 Command Line Interface Reference
5914
ip pool
Specifies name of the IP address pool or group to use for subscriber IP address allocation.
This configuration overrides the local subscriber configuration, as well as the return attributes sent by RADIUS. All
calls coming to this HA service are assigned this destination context and an IP address is allocated from the specified IP
pool or group that is configured in the context specified in the service.
calls coming to this HA service are assigned this destination context and an IP address is allocated from the specified IP
pool or group that is configured in the context specified in the service.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HA Service Configuration
configure > context context_name > ha-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ha-service)#
Syntax
ip pool name
{ default | no } ip pool
name
Specifies the logical name of the IP address pool.
name
must be an alphanumeric string of 1 through 31
characters.
no
Removes the specified IP address pool specified from the current context or disables the option for an IP
pool.
pool.
default
Clears the IP address pool or group setting.
Usage
Define a pool of IP addresses for the context to use in assigning IPs for this service.
Example
The specifies name of the IP address pool or group to use for subscriber IP address allocation:
ip pool pool1
The following command removes the specified IP address pool:
no ip pool pool1