Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
HNB-CS Network Configuration Mode Commands
▀ associate sccp-network
▄ Cisco ASR 5x00 Command Line Interface Reference
6050
associate sccp-network
Associates a predefined Signaling Connection Control Part (SCCP) network ID with the CS network instance in order to
route the messages towards MSC/VLR over IuCS interface.
route the messages towards MSC/VLR over IuCS interface.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-CS Network Configuration
configure > cs-network cs_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-cs-network-instance_id)#
Syntax
associate-sccp-network sccp_net_id
no associate-sccp-network
no
Removes the associated SCCP network ID from this HNB-CS network instance configuration.
sccp_network_id
Identifies the predefined SCCP network ID to associate with an HNB-CS network instance over IuCS/IuFlex
interface to enable connection with MSC/VLR(s).
interface to enable connection with MSC/VLR(s).
sccp_network_id
must be a predefined SCCP network ID in Global configuration mode.
Usage
Use this command to associate a preconfigured SCCP network ID over IuCS interface in HNB-GW service to
connect with CS network elements; i.e. MSC.
connect with CS network elements; i.e. MSC.
Important:
The SCCP network ID must be defined in Global Configuration mode before using it with this
command.
Important:
A single SCCP network configuration instance can not be shared with multiple HNB-CS network
instances.
Example
Following command associates SCCP network
2
with specific HNB-CS network instance:
associate-sccp-network 2