Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
HNB-CS Network Configuration Mode Commands
▀ map core-network-id
▄ Cisco ASR 5x00 Command Line Interface Reference
6054
map core-network-id
Maps/associates the CS core network id to a default Mobile Switching Center (MSC) in network using MSC point code
in HNB-CS network to allow HNBs to access UMTS network.
in HNB-CS network to allow HNBs to access UMTS network.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-CS Network Configuration
configure > cs-network cs_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-cs-network-instance_id)#
Syntax
map core-network-id cn_id point-code msc_point_code
no map core-network-id cn_id
no
Removes the mapping of a CS core network id with particular MSC point code.
cn_id
Specifies the core network identifier configured to represent a UMTS CS core network as an integer from 0
through 4095.
Multiple instance of this command can be mapped with different MSC point code.
through 4095.
Multiple instance of this command can be mapped with different MSC point code.
point-code
msc_point_code
Specifies the SS7 address of the default MSC in the CS network in point code value to a configured HNB-CS
network instance.
network instance.
point_code
is an SS7 point code in dotted-decimal ###.###.### or 8-digit decimal ######## format.
Only one instance of this MSC point code can be mapped with one CS core network id.
Usage
Use this command to map a UMTS CS core network identifier with a particular MSC point code.
This command can be entered multiple times with same MSC point code to map with one or more CS core
network Id, but a particular core network identifier can be mapped to one MSC only.
This command is instrumental in Iu-Flex functionality, whenever HNB-GW receives RESET/RESET-RES
messages from MSC with Global CN-ID information element, the response from HNB-GW is sent to the
node configured for that particular Global CN-ID.
If the RESET/RESET-RES messages do not have Global CN-ID IE, then the response of those messages is
directed to the default MSC which is configured using
This command can be entered multiple times with same MSC point code to map with one or more CS core
network Id, but a particular core network identifier can be mapped to one MSC only.
This command is instrumental in Iu-Flex functionality, whenever HNB-GW receives RESET/RESET-RES
messages from MSC with Global CN-ID information element, the response from HNB-GW is sent to the
node configured for that particular Global CN-ID.
If the RESET/RESET-RES messages do not have Global CN-ID IE, then the response of those messages is
directed to the default MSC which is configured using
msc point-code
command in this mode.
Example
The following command configures the CS core network identifier
101
with an MSC point code
1.2.3
: