Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
HNB-GW Service Configuration Mode Commands
▀ ue registration-timeout
▄ Cisco ASR 5x00 Command Line Interface Reference
6138
ue registration-timeout
Configures the UE registration timeout duration to de-register the connected UE from an HNB-GW service.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HNB-GW Service Configuration
configure > context context_name > hnbgw-service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-hnbgw-service)#
Syntax
ue registration-timeout dur
[ default | no ] ue registration-timeout
no
Disables the UE registration timeout duration and explicitly de-registers UE from the HNB-GW service.
default
Restores the UE registration timeout duration value to its default value of 120 seconds.
dur
Sets the UE registration timeout duration (in seconds) after which the UE is de-registered from HNB-GW. In
a scenario when all Iu connections are released for a subscriber, the HNB-GW service de-registers the UE
after the configured duration only.
a scenario when all Iu connections are released for a subscriber, the HNB-GW service de-registers the UE
after the configured duration only.
dur
is an integer from 60 through 300. Default: 120
Usage
Use this command to configure the minimum duration value before de-registering the UE when subscriber
fails to establish the Iu connection. If subscriber’s Iu session does not established before configured period
then UE is de-registered. Also in a scenario where all Iu connections are released for a subscriber, the HNB-
GW service waits for configured period before starting UE deregistration procedure.
fails to establish the Iu connection. If subscriber’s Iu session does not established before configured period
then UE is de-registered. Also in a scenario where all Iu connections are released for a subscriber, the HNB-
GW service waits for configured period before starting UE deregistration procedure.
Example
The following command sets the UE registration timeout duration to
150
second on HNB-GW after expiry of
which the UE is de-registered:
ue registration-timeout 150