Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
IMEI Profile Configuration Mode
▀ associate
▄ Cisco ASR 5x00 Command Line Interface Reference
6212
associate
Associate an APN remap table with this IMEI profile.
Note that an APN remap table can be associated with an IMEI profile before the table has actually been
created/configured.
created/configured.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > IMEI Profile Configuration
configure > imei-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-imei-profile-profile_name)#
Syntax
associate apn-remap-table table_name
no associate apn-remap-table
no
Disables the configured remap table association.
table_name
Define the name of an APN remap table that is to be associated with this IMEI profile for call routing based
in IMEI.
in IMEI.
Usage
Use this command to associate an APN remap table with this IMEI profile. With such an association, it is
possible to override an APN call-routing based on an IMEI.
For example, with the APN exceptions defined in an APN remap table (refer to the APN Remap Table
Configuration Mode chapter), a blank APN or an incorrect APN could be overriden. So during PDP
Activation for in incoming call, the call could be rerouted based on an IMEI in the range defined for the IMEI
profile.
possible to override an APN call-routing based on an IMEI.
For example, with the APN exceptions defined in an APN remap table (refer to the APN Remap Table
Configuration Mode chapter), a blank APN or an incorrect APN could be overriden. So during PDP
Activation for in incoming call, the call could be rerouted based on an IMEI in the range defined for the IMEI
profile.
Example
Associate the APN remap table ‘remapHO’ (remaps all calls with blank APNS to the head-office) to this
IMEI profile:
IMEI profile:
associate apn-remap-table remapHO