Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
IMS Sh Service Configuration Mode Commands
▀ failure-handling
▄ Cisco ASR 5x00 Command Line Interface Reference
6242
failure-handling
This command configures the action to take in the event of an HSS server request failure.
Product
PDIF
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > IMS Sh Interface Configuration
configure > context context_name > ims-sh-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ims-sh-service)#
Syntax
[ default ] failure-handling { profile-update-request | user-data-request } { { diameter-
result-code result_code [ to result_code ] } | timeout } action { continue | retry-and-
terminate | terminate } } }
result-code result_code [ to result_code ] } | timeout } action { continue | retry-and-
terminate | terminate } } }
default
Resets configuration for the specified keyword to the default setting.
profile-update-request
Configures failure-handling as a result of a profile update request error.
user-data-request
Configures failure-handling as a result of a user data request.
diameter-result-code result_code
[ to
result_code
]
The Result-Code data field contains a space representing errors. Diameter provides the following classes of
errors, all identified by the thousands digit in the decimal notation:
errors, all identified by the thousands digit in the decimal notation:
3xxx (Protocol Errors)
4xxx (Transient Failures)
5xxx (Permanent Failure)
result_code
specifies either a result code value (
diameter-result-code
3001
) or a range of result code
values (
diameter-result-code
3000
to
9999
) to which the failure-handling applies.
action
Configures the action to take depending on the diameter-result-code:
Continue the session
Retry and then terminate