Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ACS Rulebase Configuration Mode Commands
▀ content-filtering mode
▄ Cisco ASR 5x00 Command Line Interface Reference
642
content-filtering mode
This command allows you to enable/disable the specified Category-based Content Filtering mode in the current
rulebase.
rulebase.
Product
CF
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
content-filtering mode { category { static-and-dynamic | static-only } | server-group
cf_server_group }
cf_server_group }
no content-filtering mode
no
If previously configured, deletes the content-filtering mode configuration from the current rulebase. Content
filtering will not to be performed for the current rulebase. This is the default setting.
filtering will not to be performed for the current rulebase. This is the default setting.
category { static-and-dynamic | static-only }
Specifies the Category-based Content Filtering mode.
static-only
: Configures Category-based Content Filtering in static only mode, wherein all URLs are
compared against an internal database to categorize the requested content.
Using Category-based Content Filtering support requires configuration of the
require active-
charging content-filtering category
command in the Global Configuration Mode.
static-and-dynamic
: Configures Category-based Content Filtering in Static-and-Dynamic mode,
wherein a static rating of the URL is first performed, and only if the static rating fails to find a
match, dynamic rating of the content that the server returns is then performed.
match, dynamic rating of the content that the server returns is then performed.
Important:
Before enabling static-and-dynamic rating in the rulebase, it must be enabled at the global level as
the resources required for dynamic rating are allocated at the global level. To enable static-and-dynamic rating at the
global level, in the Global Configuration Mode use the
global level, in the Global Configuration Mode use the
require active-charging content-filtering
category static-and-dynamic
command.
server-group cf_server_group
Enables and configures the Content Filtering Server Group (CFSG) mode within the rulebase to manage an
external content filtering server with an Internet Content Adaptation Protocol (ICAP) client system.
external content filtering server with an Internet Content Adaptation Protocol (ICAP) client system.