Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
IPv6 to IPv4 Tunnel Interface Configuration Mode Commands
▀ destination address
▄ Cisco ASR 5x00 Command Line Interface Reference
6448
destination address
Configures the destination of the tunnelled packets for a manual tunnel.
Product
All
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > Tunnel Interface Configuration > IPv6 to IPv4 Tunnel Interface
Configuration
Configuration
configure > context context_name > interface interface_name tunnel > tunnel-mode ipv6ip
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-tunnel-ipv6ip)#
Syntax
destination address
address
no destination address
no
Removes configuration for the specified keyword.
address
Specifies the IP address of the destination device.
address
must be specified in IPv4 dotted decimal or IPv6
colon-separated-hexadecimal notation.
Usage
Use this command to configure the IP address of the destination end of the tunnel.
Example
The following command sets the destination address for packets on this tunnelled interface to
10.2.3.4
:
destination address 10.2.3.4