Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Link Configuration Mode Commands
mtp2-aerm-emergency-threshold ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6543
mtp2-aerm-emergency-threshold
Configure the alignment error rate monitor (AERM) emergency threshold value. This command is only available for a
lowspeed-narrowband link-type.
lowspeed-narrowband link-type.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Linkset Configuration > Link Configuration
configure > ss7-routing-domain domain_id variant var_type > linkset id linkset_id > link
id link_id
id link_id
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-linkset-linkset_id-link-link_id)#
Syntax
mtp2-aerm-emergency-threshold value
default mtp2-aerm-emergency-threshold
default
Resets the parameter to the default value of 1.
value
value
: Enter an integer from 1 to 50. Default: 1.
Usage
This command sets the emergency threshold for the MTP2 alignment error rate monitor.
Example
Set the emergency AERM threshold to 17:
mtp2-aerm-emergency-threshold 17