Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
MAG Service Configuration Mode Commands
▀ encapsulation
▄ Cisco ASR 5x00 Command Line Interface Reference
6804
encapsulation
Configures data encapsulation type to be used for specific MAG service.
Product
HSGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mag-service)#
Syntax
encapsulation { gre | ipip }
default encapsulation
default
Resets the encapsulation type to be used by this service to the default option of GRE.
{ gre | ipip }
gre
: Specifies that GRE encapsulation is to be used for PMIPv6 tunnel data between the MAG and the Local
Mobility Anchor (LMA). This is the default for this command.
ipip
: Specifies that IP-in-IP encapsulation is to be used for PMIPv6 tunnel data between the MAG and the
LMA.
Usage
Use this command to select the encapsulation type to be used for PMIPv6 tunnel data between the MAG and
the LMA.
the LMA.
Example
The following command sets the encapsulation data to IP-in-IP:
encapsulation ipip