Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
MME Service Configuration Mode Commands
▀ location-reporting
▄ Cisco ASR 5x00 Command Line Interface Reference
6944
location-reporting
Enables or disables the UE location reporting function on the MME service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
[ no | default ] location-reporting
default
Disables the location reporting feature on MME service.
no
Disables the location reporting feature on MME service.
Usage
Use this command to enable or disable the UE location reporting feature on the MME service. When enabled
the MME forwards a location report request for a specific UE from the P-GW to the eNodeB.
the MME forwards a location report request for a specific UE from the P-GW to the eNodeB.
Important:
Location reporting, also known as User Location Information (ULI) Reporting, is a licensed feature
and requires the purchase of the ULI Reporting feature license.
Example
The following command sets the MME service to allow for location reporting for UEs:
location-reporting