Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
MME SGs Service Configuration Mode Commands
timer ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7003
timer
Configures the SGs-AP timer values.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME SGs Service Configuration
configure > context context_name > sgs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgs-service)#
Syntax
timer { ts6-1 value | ts10 value
| ts12-1 value
| ts12-2 value
| ts13 value | ts8 value
|
ts9 value
}
default timer { ts10 | ts12-1 | ts12-2 | ts13 | ts6-1 | ts8 | ts9 }
default timer {
ts10 | ts12-1 | ts12-2 | ts13 | ts6-1 | ts8 | ts9 }
Returns the timer to its default setting.
ts10 value
Specifies the Ts10 timer value (in seconds) as an integer from 1 through 30. This timer is used to guard the
Implicit IMSI detach from non-EPS services procedure.
Default: 4.
Implicit IMSI detach from non-EPS services procedure.
Default: 4.
ts12-1 value
Specifies the Ts12-1 timer value (in seconds) as an integer from 8 through 23048. This timer is used to
control the reset of the 'MME-Reset' variable. It is expected to take a value greater than the longest periodic
tracking area update timer running on the MME, plus the transmission delay on the radio interface.
Default: 36000.
control the reset of the 'MME-Reset' variable. It is expected to take a value greater than the longest periodic
tracking area update timer running on the MME, plus the transmission delay on the radio interface.
Default: 36000.
ts12-2 value
Specifies the Ts12-2 timer value (in seconds) as an integer from 1 through 120. This timer is used to guard
the MME reset procedure. There is one Ts12-2 timer per VLR for which the MME has an SGs association.
Default: 4.
the MME reset procedure. There is one Ts12-2 timer per VLR for which the MME has an SGs association.
Default: 4.
ts13 value
Specifies the Ts13 timer value (in seconds) as an integer from 1 through 30. This timer configures the
retransmission interval for sending SGs message SGsAP-EPS-DETACH-INDICATION to MSC/VLR due to
an Implicit IMSI detach from EPS services. If no SGsAP-EPS-DETACH-ACK is received, the MME will
resend SGsAP-EPS-DETACH-INDICATION message upon expiry of this timer.
Default: 4.
retransmission interval for sending SGs message SGsAP-EPS-DETACH-INDICATION to MSC/VLR due to
an Implicit IMSI detach from EPS services. If no SGsAP-EPS-DETACH-ACK is received, the MME will
resend SGsAP-EPS-DETACH-INDICATION message upon expiry of this timer.
Default: 4.