Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ACS Rulebase Configuration Mode Commands
nat binding-record ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
703
nat binding-record
This command allows you to configure NAT Binding Record (NBR) generation.
Important:
This command is only available in StarOS 8.3. In StarOS 9.0 and later releases this command is
available in the Firewall-and-NAT Policy Configuration Mode.
Product
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
nat binding-record edr-format edr_format_name [ port-chunk-allocation ] [ port-chunk-
release ] +
release ] +
{ default | no } nat binding-record
default
Configures this command with its default setting.
Default:
Default:
port-chunk-release
no
If previously configured, deletes the configuration from the current rulebase.
edr-format edr_format_name
Specifies the EDR format.
edr_format_name
must be the name of an EDR format, and must be an alphanumeric string of 1 through 63
characters.
port-chunk-allocation
Specifies generating NBR when a port chunk is allocated.
port-chunk-release
Specifies generating NBR when a port chunk is released.