Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Operator Policy Configuration Mode
▀ imei
▄ Cisco ASR 5x00 Command Line Interface Reference
7082
imei
Defines a range of IMEI (International Mobile Equipment Identity) numbers and associates an IMEI profile with the
range definition.
range definition.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Operator Policy Configuration
configure > operator-policy policy_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-opr-policy-policy_name)#
Syntax
imei range IMEI_number to IMEI_number { imei-profile profile_name | sv ## imei-profile
profile_name }
profile_name }
no imei range IMEI_number to IMEI_number sv ##
no
Removes the IMEI definition from the policy configuration.
range IMEI_number to IMEI_number
Defines the beginning and end of a range of IMEIs.
IMEI_number
must be a numerical string of up to 14 digits.
sv ##
Identifies the software version to fine-tune the IMEI definition. This keyword should only be included if the
IMEISV is retrievable.
IMEISV is retrievable.
##
must be a 2-digit integer.
imei-profile profile_name
Identify the IMEI profile that defines the actions appropriate to the devices identified within the specified
range.
range.
profile_name
must be an alphanumeric string of 1 through 64 characters.
Usage
This command defines the IMEI ranges that will be used by the operator policy to determine if the device is
appropriately selected for actions defined in the specified IMEI profile.
appropriately selected for actions defined in the specified IMEI profile.
Example
All devices with an IMEI of
123123*
requesting Attach shall be subject to actions in the
blacklist_profile1