Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
OSPF Configuration Mode Commands
ip vrf ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7141
ip vrf
Configures the Virtual Routing and Forwarding (VRF) instances for OSPF routing protocol.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > OSPF Configuration
configure > context context_name > router ospf
Entering the above command sequence results in the following prompt:
[local]host_name(config-ospf)#
Syntax
[ no ] ip vrf vrf_name
no
Disables the VRF instances and removes the configured VRF context association for OSPF routing.
vrfvrf_name
Configures Virtual Routing & Forwarding (VRF) parameters.
vrf_name
is name of a preconfigured VRF context configured in Context Configuration Mode via the
ip
vrf
command. It is an alphanumeric string of 1 through 63 characters.
Usage
Use this command to configure the IP VRF forwarding also to associate the preconfigured VRF context with
the specific tunnel interface.
This command creates and enters the OSPF VRF Configuration Mode if required to configure the VRF
context instances for OSPF routing.
the specific tunnel interface.
This command creates and enters the OSPF VRF Configuration Mode if required to configure the VRF
context instances for OSPF routing.
Example
The following command enables preconfigured VRF context instance
ospf_vrf1
for OSPF routing and
enters the OSPF VRF Configuration mode:
ip vrf ospf_vrf1