Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PCC-Action-Set Configuration Mode Commands
▀ authorize
▄ Cisco ASR 5x00 Command Line Interface Reference
7204
authorize
This command sets an action to change the various authorization parameters used for the IP-CAN session under PCC-
Action-Set configuration instance for PCC-Service configuration.
Action-Set configuration instance for PCC-Service configuration.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Action-Set Configuration
configure > context context_name > pcc-service service_name > action-set action_set_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-action-set)#
Syntax
[no] authorize {apn-mbr | default-eps-bearer | qci qci_value} qos-profile qos_prof_name
no
Removes the configured action for QoS Profile authorization parameters from PCC-Action-Set configuration
instance for PCC-Service configuration.
instance for PCC-Service configuration.
apn-mbr
Sets the action for QoS authorization of Maximum Bit Rate (MBR) at APN through a pre-configured QoS
profile name
profile name
qos_prof_name
which is to use for the authorization at different level in an PCC-Service
instance.
This keyword is applicable only to EPS access type. MBR Download and MBR Upload values of the QoS
profile is used with this authorization.
This keyword is applicable only to EPS access type. MBR Download and MBR Upload values of the QoS
profile is used with this authorization.
default-eps-bearer
Sets the action QoS authorization of the Default EPS bearer in an EPS access network through a pre-
configured QoS profile name
configured QoS profile name
qos_prof_name
which is to use for the authorization at different level in an
PCC-Service instance.
This keyword is applicable only to EPS access type. QoS Class Identifier (QCI) and Allocation and Retention
Priority (ARP) values of the QoS profile is used with this authorization.
This keyword is applicable only to EPS access type. QoS Class Identifier (QCI) and Allocation and Retention
Priority (ARP) values of the QoS profile is used with this authorization.
qci
qci_value
Sets the action QoS authorization per QCI in case of PCEF binding through a pre-configured QoS profile
name
name
qos_prof_name
which is to use for the authorization at different level in an PCC-Service instance.
qci_value
must be an integer value between 1 through 255.
Important:
This keyword is applicable only in case of PCEF binding. QCI defined in QoS profile is not used
when this keyword is active, so this keyword is repeated per QCI that has to be authorized by IPCF. For each QCI
authorization Maximum Bit Rate Upload/Download (MBR DL/MBR UL) or Guaranteed Bit Rate Upload/Download
(GBR DL/MBR UL) and ARP values of the QoS profile is used with this authorization.
authorization Maximum Bit Rate Upload/Download (MBR DL/MBR UL) or Guaranteed Bit Rate Upload/Download
(GBR DL/MBR UL) and ARP values of the QoS profile is used with this authorization.