Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PCC-Condition-Group Configuration Mode Commands
▀ imsi
▄ Cisco ASR 5x00 Command Line Interface Reference
7272
imsi
This command defines a condition based on the International Mobile Station Identification number (IMSI) of a
subscriber in an IP-CAN session.
subscriber in an IP-CAN session.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Condition Group
Configuration
Configuration
configure > context context_name > pcc-service service_name > condition group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-condition-group)#
Syntax
[ no ] imsi operator value imsi
[ no ] imsi operator profile-attribute spr_attr_value
[ no ] imsi operator subscription-attribute subs_prof_attr_value
no
Removes the specified condition definition.
operator
Specifies how to logically match the information in the analyzed field.
operator
must be one of the following:
!=
: Does not equal
=
: Equals
imsi
Specifies the IMSI of subscriber to be used for condition validation in an IP-CAN session.
imsi
must be a string of between 8 to 15 digits which starts with 3 digit of MCC then 2 to 3 digit of MNC.
Wildcard characters $ and * are allowed. The * wildcard matches multiple characters and the $ wildcard
matches a single character. If you do not want the wildcard characters interpreted as a wildcard enclose them
in single quotes ( ‘ ). For example; ‘$’.
matches a single character. If you do not want the wildcard characters interpreted as a wildcard enclose them
in single quotes ( ‘ ). For example; ‘$’.
profile-attributespr_attr_value
Specifies the profile attribute value in SPR to match with IMSI in an IP-CAN session as condition.
spr_attr_value
must be an alphanumeric string of from 1 through 63 characters.