Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PCC-Event-Notification-Interface-Endpoint Configuration Mode Commands
▀ peer select-peer
▄ Cisco ASR 5x00 Command Line Interface Reference
7338
peer select-peer
This command sets the configured remote Event Notification collection server as primary and secondary servers for
event notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint instance.
event notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint instance.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Event Notification Interface Endpoint Configuration
configure > context context_name > event-notif-endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ntfyintf-endpoint)#
Syntax
peer select-peer pri_peer_name secondary sec_peer_name
pri_peer_name
Sets the configured remote PCC-Event-Notification-Interface-Endpoint peer as primary peer for event
notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint instance.
notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint instance.
pri_peer_name
must be a pre-configured peer name configured with
peer name
command in this
configuration mode.
secondary
sec_peer_name
Sets the configured remote PCC-Event-Notification-Interface-Endpoint peer as secondary peer for event
notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint instance.
notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint instance.
sec_peer_name
must be a pre-configured peer name configured with
peer name
command in this
configuration mode.
Usage
Use this command to set the configured remote Event Notification collection server as primary and secondary
node for event notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint
instance.
This configuration is used when peer selection algorithm is set to primary-secondary using
node for event notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint
instance.
This configuration is used when peer selection algorithm is set to primary-secondary using
peer select-
algorithm
command in this configuration mode.
Example
Following command configures the specified peer
event1
as primary and
event2
as secondary node for
event notification collection during IP-CAN session in PCC-Event-Notification-Interface-Endpoint instance.
peer select-peer event1 secondary event2