Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PCC-Service Configuration Mode Commands
▀ timeout idle
▄ Cisco ASR 5x00 Command Line Interface Reference
7408
timeout idle
Configures the idle timeout duration for subscriber session and also sets the action to be taken by system on expiry of
timeout duration .
timeout duration .
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration
configure > context context_name > pcc-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-service)#
Syntax
timeout idle idle_dur [ action reauthorize ]
[ no | default ] timeout idle
no
Removes the configured idle timeout value and action set in in PCC Service instance.
default
Sets the the idle timeout duration to the default value of ‘0’ which disables the idle timeout configuration in
PCC Service instance.
PCC Service instance.
idle_dur
Default: 0
Designates the maximum duration of the session, in seconds, after the expiry of which the system considers
the session as dormant or idle and invokes the reauthorization of session action, if configured.
Designates the maximum duration of the session, in seconds, after the expiry of which the system considers
the session as dormant or idle and invokes the reauthorization of session action, if configured.
idle_dur
must be a value in the range from 0 through 4294967295.
The special value 0 disables the timeout specified.
action reauthorize
This optional keyword sets the system to trigger the reauthorization of session after expiry of the timeout
duration configured through
duration configured through
idle_dur
value.
Usage
Use this command to set the idle time duration for subscriber session to determine the dormant session.
This is configuration sets the time in seconds for idle session (sessions with no activity/signaling). On expiry
of this timeout duration action of reauthorization of session shall be triggered. In case of reauthorization
request failure, session termination shall be triggered.
Refer to the
This is configuration sets the time in seconds for idle session (sessions with no activity/signaling). On expiry
of this timeout duration action of reauthorization of session shall be triggered. In case of reauthorization
request failure, session termination shall be triggered.
Refer to the
timeout long-duration
command in this chapter for additional information.