Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PCC-Sp-Endpoint Configuration Mode Commands
▀ diameter peer-select
▄ Cisco ASR 5x00 Command Line Interface Reference
7418
diameter peer-select
This command nominates primary and secondary Diameter peers amongst the peers configured under Diameter
Endpoint Configuration instance which is associated with a PCC-Sp-Endpoint configuration.
Endpoint Configuration instance which is associated with a PCC-Sp-Endpoint configuration.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Sp Endpoint Configuration
configure > context context_name > pcc-sp-endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-spendpoint)#
Syntax
diameter peer-select peer pri_peer_name [row-precedence
row_prec_name
selection-condition
imsi
{mcc
mcc-string
[mnc
mnc-string
]
[msin
msin-string
] |
mnc
mnc-string
[msin
msin-
string
] |
msin
msin-string
}]
[realm realm_name] [secondary-peer sec_peer_name [realm
sec_realm_name]]
no diameter peer-select
no diameter peer-select row-precedence
no
To remove all the configuration parameters.
To remove a particular selection-condition, a row-precedence value is specified.
To remove a particular selection-condition, a row-precedence value is specified.
peer pri_peer_name
Sets a configured Diameter peer, which is configured in Diameter Endpoint configuration associated with
PCC-Sp-Endpoint instance configuration, as primary in Diameter peer selection process for IPCF
configuration.
The
PCC-Sp-Endpoint instance configuration, as primary in Diameter peer selection process for IPCF
configuration.
The
pri_peer_name
is a pre-configured Diameter peer in Diameter Endpoint configuration which is
associated with a PCC-Sp-Endpoint configuration and must be an alphanumerical string from 1 through 63
characters.
characters.
pri_peer_name
allows punctuation marks.
row-precedence
row_prec_name
The row-precedence decides order of evaluation of the selection conditions.
The
The
row_prec_name
is an integer between 1 and 63. Lower the value, higher is the priority of evaluation.
selection-condition
The selection-condition parameter is used to define Diameter SPR peer selection conditon.