Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PDSN Service Configuration Mode Commands
data-over-signaling ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7521
data-over-signaling
Enables the data-over-signaling marking feature for A10 packets.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
[ no | default ] data-over signaling
default
Sets / Restores default value assigned for specified parameter for
data-over signaling
no
Default: Enabled
Disable the data-over signaling feature for A10 packets.
Disable the data-over signaling feature for A10 packets.
Usage
Use this command to enable or disable the data-over signaling feature for A10 packets.
Important:
This is a customer-specific command.
Example
no data-over-signaling