Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PDSN Service Configuration Mode Commands
ip local-port ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7535
ip local-port
Configures the local User Datagram Protocol (UDP) port for the R-P interfaces’ IP socket.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
ip local-port number
default ip local-port
number
Default:
699
Specifies the UDP port number.
number
can be any integer value between
1
and
65535
.
default
Designates UDP port, default value as
699
.
Usage
Specify the UDP port that should be used for communications between the Packet Control Function (PCF)
and the PDSN.
and the PDSN.
Important:
The UDP port setting on the PCF must match the local-port setting for the PDSN service on the
system in order for the two devices to communicate.
Example
Use the following command to specify a UDP port of
3950
for the PDSN service to use to communicate with
the PCF on the R-P interface:
iplocal-port 3950