Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Policy Control Configuration Mode Commands
▀ apn-name-to-be-included
▄ Cisco ASR 5x00 Command Line Interface Reference
7636
apn-name-to-be-included
This command configures the APN name to be included in CCR Gx messages.
Product
GGSN
IPSG
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IMS Authorization Configuration > Policy Control
Configuration
Configuration
configure > context context_name > ims-auth-service service_name > policy-control
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-imsa-dpca)#
Syntax
apn-name-to-be-included { gn | virtual }
default apn-name-to-be-included
gn | virtual
Specifies which APN name must be sent in the Gx messages.
gn
: Specifies to send the real APN name.
virtual
: Specifies to send the virtual APN name if present, else to send the real APN name.
default
Applies the default setting for this command.
Default:
Default:
gn
Usage
This feature is developed to implement a single global APN for the Enterprise services with the ability to
have separate virtual APNs per single Enterprise, group of Enterprises sharing the same service group or per
department.
To implement this feature, a configurable option is introduced per interface Rf, Gx, Gy and per APN. That is,
a service specific CLI “
have separate virtual APNs per single Enterprise, group of Enterprises sharing the same service group or per
department.
To implement this feature, a configurable option is introduced per interface Rf, Gx, Gy and per APN. That is,
a service specific CLI “
apn-name-to-be-included
” is configured for interfaces Rf, Gx, Gy separately. It
can take values 'gn' or 'virtual'. Based on the value configured for this command, the Called-Station-Id AVP
is populated.
This command is used to configure the APN name to be included in the CCR Gx messages to the PCRF —
the real APN name or the virtual APN name.
The name of the virtual APN and the IP pool are signaled during the UE attach to the Enterprise PDN from
the 3GPP AAA server over S6b interface with a new vendor-specific AVP “Virtual-APN-Name”. The
is populated.
This command is used to configure the APN name to be included in the CCR Gx messages to the PCRF —
the real APN name or the virtual APN name.
The name of the virtual APN and the IP pool are signaled during the UE attach to the Enterprise PDN from
the 3GPP AAA server over S6b interface with a new vendor-specific AVP “Virtual-APN-Name”. The