Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
PVC Interface Configuration Mode Commands
ip ospf hello-interval ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7707
ip ospf hello-interval
This command configures the delay time in seconds, for OSPF hello interval.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PVC Interface Configuration
configure > context context_name > interface interface_name point-to-point
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-pvc)#
Syntax
ip ospf hello-interval value
no ip ospf hello-interval
no
Deletes the value set and returns the value to its default.
value
The interval, in seconds, between sending hello packets. This value is typically set to be 1/4 of the value of
the
the
dead-interval
.
value
must be an integer from 1 through 65535. Default: 10
Usage
Use this command to set the delays for the hello-interval.
Example
To set the hello-interval to 25, use the following command;
ip ospf hello-interval 25
To delete the setting for the hello-interval and reset the hello-interval value to its default of 10, use the
following command’
following command’
no ip ospf hello-interval