Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
RNC Configuration Mode Commands
▀ direct-tunnel
▄ Cisco ASR 5x00 Command Line Interface Reference
7752
direct-tunnel
This command enables/disables the direct tunnel feature through the interface to the radio network controller (RNC).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > luPS Service Configuration > RNC Configuration
configure > context context_name > iups-service service_name > rnc id rnc_id
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service-rnc)#
Syntax
direct-tunnel not-permitted-by-rnc
default direct-tunnel
default
Sets the direct tunnel support on RNC to default mode; i.e. enabling direct tunnel.
not-permitted-by-rnc
Default: enabled
Disables the direct-tunnel support on radio network controller (RNC).
Disables the direct-tunnel support on radio network controller (RNC).
Usage
Use this command to disable/enable the direct-tunnel function through the interface to the RNC.
Example
Following command disables the direct tunnel support to the RNC:
direct-tunnel not-permitted-by-rnc