Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
ACS Ruledef Configuration Mode Commands
cca quota-state ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
777
cca quota-state
Specifies the quota state of a subscriber for prepaid credit control service. In release 12.0 and later, this command
should be used as a post-processing rule. For more information on post-processing policy command, refer to the ACS
Rulebase Configuration Mode Commands chapter in this guide.
should be used as a post-processing rule. For more information on post-processing policy command, refer to the ACS
Rulebase Configuration Mode Commands chapter in this guide.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Ruledef Configuration
active-charging service service_name > ruledef ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-ruledef)#
Syntax
[ no ] cca quota-state operator { limit-reached | lower-bandwidth }
no
Disables the configured credit control quota state.
operator
Specifies how to match.
operator
must be one of the following:
!=
: Does not equal
<=
: Lesser than or equals
=
: Equals
>=
: Greater than or equals
limit-reached
This state matches an affirmative end-of-quota indication for the current ruledef from the prepay server.
lower-bandwidth
This state matches the lower-bandwidth quota state of a rating group.
Usage
This command supports URL redirection and creates a rule for subscriber prepaid quota state as exhausted or
not exhausted.
If a subscriber has exhausted the quota but has not exhausted the qualified period, a different charging-action
can be applied via the
not exhausted.
If a subscriber has exhausted the quota but has not exhausted the qualified period, a different charging-action
can be applied via the
cca quota-state
command.
Example