Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
RoHC Profile Common Options Configuration Mode Commands
inactive-traffic-release-hc-context-timer ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7789
inactive-traffic-release-hc-context-timer
Sets an inactivity timer that is checked when inactivity is detected on an SO67 A10 bearer connection with negotiated
RoHC parameters. When this timer expires, the header compression context is released.
RoHC parameters. When this timer expires, the header compression context is released.
Product
HSGW
PDSN
Privilege
Administrator
Mode
Exec > Global Configuration > RoHC Profile Configuration > RoHC Profile Common Options Configuration
configure > rohc-profile profile-name profile_name > compression-options
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-rohcprofile-profile_name-common)#
Syntax
inactive-traffic-release-hc-context-timer seconds
no inactive-traffic-release-hc-context-timer
no
Removes previously configured value for this command. No value disables the feature.
seconds
Specifies the time, in seconds, the system waits for activity on the bearer channel before releasing the header
compression context as an integer from 1 through 65535.
compression context as an integer from 1 through 65535.
Usage
Use this command to set a timer that is started upon detecting inactivity on the bearer channel. Upon expiry,
the header compression context is released. Enable this feature for more efficient memory utilization.
the header compression context is released. Enable this feature for more efficient memory utilization.
Example
The following command sets the bearer channel inactivity timer to 60 seconds:
inactive-traffic-release-hc-context-timer 60