Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
RoHC Profile Compression Configuration Mode Commands
▀ rtp-time-stride
▄ Cisco ASR 5x00 Command Line Interface Reference
7806
rtp-time-stride
Sets the time interval used for one TS (RTP Time Stamp) stride. This interval is used when timer-based encoding is
enabled.
enabled.
Product
HSGW
PDSN
Privilege
Administrator
Mode
Exec > Global Configuration > RoHC Profile Configuration > RoHC Profile Compression Configuration
configure > rohc-profile profile-name profile_name > compression-options
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-rohcprofile-profile_name-comp)#
Syntax
rtp-time-stride num_ms
default rtp-time-stride
default
Returns the command to its default value.
num_ms
Specifies the number of milliseconds to use for TS_STRIDE as an integer from 0 through 999999999.
Default: 20
Default: 20
Usage
Use this command to set the length of the TS_STRIDE in milliseconds.
Example
The following command sets TS_STRIDE to 100ms:
rtp-time-stride 100