Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
SCCP Network Configuration Mode Commands
description ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7915
description
This command defines a string that describes the SCCP network. The description is used for operator reference.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SCCP Network Configuration
configure > sccp-network id_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-sccp-network-sccp_id)#
Syntax
description string
no description
string
This is a string to describe the SCCP network.
string
must be an alphanumeric string from 1 through 127 characters in length. If there are spaces in the
string the string must be enclosed in double-quotes. For example; “This is a Description”.
no
Removes the description from the system configuration.
Usage
Use this command to configure a description of this SCCP service for operator reference.
Example
The following command sets the description to “This is the SCCP Service Number 1”:
description ”This is the SCCP Service Number 1.”