Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
SGSN Global Configuration Mode Commands
bssgp-message ptp-bvc-reset ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7997
bssgp-message ptp-bvc-reset
This command determines the SGSN response, per BVCI, to receipt of a peer-to-peer BVC Reset.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
bssgp-message ptp-bvc-reset { frc-subscriber-standby | retain-current-state }
default bssgp-message ptp-bvc-reset
default
Including
default
with the command configures the SGSN to use default behavior so that the SGSN
continues with the current state once a peer-to-peer BVC Reset is received.
frc-subscriber-standby
This keyword instructs the SGSN to change the state of the subscribers to standby when the peer-to-peer
BVC Reset is received.
BVC Reset is received.
retain-current-state
Default
This keyword instructs the SGSN to continue the current state of the subscribers when the BVC Reset
message is received.
This keyword instructs the SGSN to continue the current state of the subscribers when the BVC Reset
message is received.
Usage
This command allows the operator to specify the action the SGSN needs to take whenever the SGSN receives
a peer-to-peer BVC Reset message for a specific BVCI.
To confirm the configuration for the response to the BVC Reset, use the
a peer-to-peer BVC Reset message for a specific BVCI.
To confirm the configuration for the response to the BVC Reset, use the
show sgsn-mode
command from
the Exec mode.
Example
Change the default configuration and have the SGSN change subscriber states to standby:
bssgp-message ptp-bvc-reset frc-subscriber-standby